Table Saw Cabinet

Make 41

I saw plans for this cabinet and liked the vertical slide doors. It was intended to fit under the table saw, but my saw doesn’t have enough space. This is OK since I didn’t like the idea of drawers opening in that direction. While a cabinet makes great use of otherwise dead space, I still lose space in front of the table for drawer clearance. So, I think I’d rather build shelves under the table so I don’t lose that valuable space long my wall. I still liked the design, so I just made it free standing and that also gave me a new surface for either tools or projects.

This is the first my first time building with pocket holes and also batching up drawers to fit a cabinet. I needed to get better at making the drawers square, but otherwise, things worked well. A couple of the drawers are a little crooked, so the faces don’t sit exactly right. The top drawer, in particular, is crooked. But they’re all functional and look respectable enough. Next time I’m going to use corner clamps and pay closer attention while also making it easier and faster.

The vertical drawers are pretty nifty. I have three mounts for saw blades figuring I’ll have three basic types of blades: Combo, ripping, and cross-cutting. I’ll probably keep a spare or two of each as I try different blades and replace dull blades. I also put in a mount for my dado blade, dado blade insert, and the dado blade brake. I also have a spot for some push sticks and riving knives. I made the mounts out of scrap plywood with 5/8-inch dowels. For the dado blades and insert, I traced and cut a mount on the bandsaw. Then glued and nailed them into place. I’m pretty happy with how these drawers turned out. I haven’t put much thought into what will go into the horizontal drawers, so they’ll fill up as time goes.

I still have some items hanging on the side of my saw. The miter gauge and blade wrenches are still hanging on the side, which works for me.

When it gets warmer, I think I’ll glue a mount to the side to hang my cross cut sled.

 

Leave a Reply