Planer Cart

Make 7, Week 4

Another power tool cart. When I picked up some milled hardwood a couple week ago, I realized the value of milling my own wood. Rough sawn lumber cost 1/2 as much as the milled boards. This includes waste lost to the milling. So, in my head, this thing will pay for itself! We’ll see, I guess. I really do like it though. Along with the small bench top jointer I have, it’s very satisfying when all the wood comes together as intended.

My first project with the planer was an end grain cutting board. After gluing it up, I sent the long grain board through the planer to clean up the glue and level out of the boards. This was prior to cross cutting for end-grain. More on this project soon. When a clean and level board came out, I gave a “whoa, that’s cool.”

Planer Cart Drawing
Planer Cart Drawing

The second project was the cart to hold the tool. I took extra time to joint and plane all the dimensional boards to be square and same thickness. Clearly, overkill, but everything came together like Legos, and like I said, it was very satisfying… even if the board lengths are off a mm or few.

Planer Cart Build Edges
Planer Cart Build #1
Planer Cart Build #2
Planer Cart Build #2

I did the wheel barrow design here and left two legs longer. I hand planed the longer legs to make them level with the wheels. Given the weight of the tool and dimensions of the cart, the wheel barrow design doesn’t seem that ideal. There isn’t the same leverage to make it easy to lift. I think I’d rather this have four wheels, however, I’ve been thinking of trying a design for retractable wheels. I may try that on my next cart.

I put a shelf at the bottom, which I think was left over from cutting the bench top. I plan to add shelves to some of these carts and could do that here too.

Front of Planer Cart
Planer Cart Ready to Use
Planer Cart Stored
Planer Cart Stored

Links

Leave a Reply